PROJ-FILE-FMT=2                 
PROJ-NAME='Yokogawa D-3300X'  
PROJ-DRIVER-REV='Rev A'
DOC-REV-USER-MESSAGE['Rev A']="WARNING: Before attempting to control the Yokogawa with the SmartPanel the RS-232 baud rate setting must be set to 19200. Failure to do this will make the projector unresponsive and will require disconnecting projector power while on to restore control. To set the baud rate, turn on the projector manually, and press the Keystone button. Once the keystone menu is displayed press the Enter key 5 times in a row. This will put you in the Service Menu 2. Change the baud rate setting to 19200. To exit the menu hit the Menu button."
IR-TIME-0L=1.315m					; MANDATORY special 0 or 1 on/off pairs
IR-TIME-0H=420u			 
IR-TIME-1L=315u
IR-TIME-1H=695u

PROJ-BAUD-RATE=19200,8,N,1

VOL-MUTE=0
VOL-RANGE=28
VOL-FLOOR=0

; CODE FLAGS
;	 RSCODE='...'				
;  	 REPEATS=X 		 			OPTIONAL, default = 0 = REPEAT ON KEYDOWN - NOT WORK FOR VOLUME
;    IS-SELECTION 				OPTIONAL, allows code to be used in selection pull down
;    IS-HIDDEN 					OPTIONAL, allows code to be used in hidden function pull down
;    USEREPEAT                  OPTIONAL, attaches repeat code to string (deprecated)
;	 USEPREFIX           		OPTIONAL, attaches suffix code to string (deprecated)
;    USESUFFIX					OPTIONAL, attaches prefix code to string (deprecated)
;	 INCLUDECONT				OPTIONAL, include continuations in repetitions
;	 CONTINUE='X'				OPTIONAL, continuation code
; VALUES (mutually exclusive)
;	 RS232="..."				RS232 CODE 
;	 IR="..."					IR CODE

CODE-SUBST[PAD]="D7s,D1s"
CODE-SUBST[OPEN]="'@G',$D"
CODE-SUBST[CLOSE]="'@Q',$D"

RSCODE['VIDEO']		="OPEN,'!PRM05',$D,CLOSE,PAD",											IS-SELECTION
RSCODE['S-VIDEO']	="OPEN,'!PRM0D',$D,CLOSE,PAD",											IS-SELECTION
RSCODE['RGB1']		="OPEN,'!PRM08',$D,CLOSE,PAD",											IS-SELECTION
RSCODE['RGB2']		="OPEN,'!PRM09',$D,CLOSE,PAD",											IS-SELECTION
RSCODE['COMPONENT']	="OPEN,'!PRM80',$D,CLOSE,PAD",											IS-SELECTION
RSCODE['POWER ON']	="OPEN,D2s,'!PRM01',$D,D2s, CLOSE"					
RSCODE['POWER OFF']	="OPEN,'!PRM02',$D, CLOSE"
RSCODE['VOLUME+']	="OPEN,'!PRM30',$D, CLOSE"
RSCODE['VOLUME-']	="OPEN,'!PRM31',$D, CLOSE"
RSCODE['POWER POLL']="OPEN,'!PLS'  ,$D, d2s, CLOSE,d1s"
RSCODE['MENU']		="OPEN,'!PRM40',$D, CLOSE",					IS-HIDDEN
RSCODE['ENTER']		="OPEN,'!PRM5B',$D, CLOSE",					IS-HIDDEN
RSCODE['ADJUST UP']	="OPEN,'!PRM46',$D, CLOSE",					IS-HIDDEN
RSCODE['ADJUST DOWN']	="OPEN,'!PRM47',$D, CLOSE",					IS-HIDDEN
RSCODE['ADJUST LEFT']	="OPEN,'!PRM49',$D, CLOSE",					IS-HIDDEN
RSCODE['ADJUST RIGHT']	="OPEN,'!PRM48',$D, CLOSE",					IS-HIDDEN
RSCODE['MUTE']		="OPEN,'!PRM32',$D, CLOSE",					IS-HIDDEN
RSCODE['FREEZE']	="OPEN,'!PRM63',$D, CLOSE",					IS-HIDDEN
RSCODE['PinP']		="OPEN,'!PRM60',$D, CLOSE",					IS-HIDDEN
RSCODE['PICTURE']	="OPEN,'!PRM2D',$D, CLOSE",					IS-HIDDEN
RSCODE['WIDE']		="OPEN,'!PRM4E',$D, CLOSE",					IS-HIDDEN
RSCODE['KEYSTONE']	="OPEN,'!PRM7C',$D, CLOSE",					IS-HIDDEN
RSCODE['ZOOM+']		="OPEN,'!PRM76',$D, CLOSE",			IS-HIDDEN
RSCODE['ZOOM-']		="OPEN,'!PRM77',$D, CLOSE",			IS-HIDDEN
RSCODE['CANCEL']		="OPEN,'!PRM71',$D, CLOSE",			IS-HIDDEN
RSCODE['VID MUTE ON']		="OPEN,'!PRM37',$D, CLOSE",			IS-HIDDEN
RSCODE['VID MUTE OFF']		="OPEN,'!PRM38',$D, CLOSE",			IS-HIDDEN
RSCODE['AUD MUTE ON']		="OPEN,'!PRM33',$D, CLOSE",			IS-HIDDEN
RSCODE['AUD MUTE OFF']		="OPEN,'!PRM34',$D, CLOSE",			IS-HIDDEN


IRCODE['REPEAT']	=""				
; POWER Polling Section MANDATORY IF 

POWER-POLL-INTERVAL=4s				; FREQUENCY
POWER-POLL-TIMEOUT=6s				; TIME TO WAIT FOR RESPONSE - TIMEOUT = FAIL (>0)
POWER-POLL-THRESHOLD=5				; NUMBER OF FAILURE BEFORE ASSERING POWER FAIL
POWER-POLL-STARTBYTE=14				; BYTE TO TEST
POWER-POLL-MATCH-ANY=FALSE 			; 
POWER-POLL-MATCH-BYTES="'N'"		; 16 MAX ALLOWED
POWER-POLL-DURING-WARMUP=FALSE
POWER-POLL-DURING-LOCKOUT=FALSE
;POWER-POLL-TESTBYTE-MASK=$01		; SET TO FF IF NOT USED

; MANDATORY 

WARM-UP-DELAY=30s 						; TIME TO TURN ON WARM UP LIGHT COSMETIC ONLY
POWER-ON-DELAY=20s 						; RESORTATION OF SELECTION
DEFAULT-LOCKOUT=90s						; 
IO-DOWNTIME=100m 							; 29MS PER BIT
IO-CANCEL-DOWNTIME-ON-RX=FALSE			; 
USE-MODULATION-WHEN-WIRED=FALSE 		;
INVERT-LINE-WHEN-WIRED=TRUE	        	;
CARRIER-PERIOD=25u						; 
CARRIER-DUTY-CYCLE=50					; DEFAULTS TO 50%
PROJ-USES-ABSOLUTE-VOL=FALSE
POWER-SENSE-OPTIONS=RS232POLL,SENSOR,NONE
IR-WIRING-OPTIONS=
PROJ-MISSING-THRESHOLD=5          ; NUMBER OF TIMEOUTS - ONLY USED WHEN PROJ IS POLLING AND TELLS 1 - 255
; FIRMWARE FOIBLES
BYTES-TO-QUEUE=2                        ; 

; Section for setting the defaults of the hidden functions

DEFAULT-HID-FUNCT[OFF]		='MENU'						; OPTIONAL
DEFAULT-HID-FUNCT[VUP]		='ADJUST UP'					; OPTIONAL
DEFAULT-HID-FUNCT[VDN]		='ADJUST DOWN'					; OPTIONAL
DEFAULT-HID-FUNCT[1]		='MUTE'						; OPTIONAL
DEFAULT-HID-FUNCT[2]		='ENTER'					; OPTIONAL
DEFAULT-HID-FUNCT[3]		='ADJUST LEFT'					; OPTIONAL
DEFAULT-HID-FUNCT[4]		='ADJUST RIGHT'				; OPTIONAL

; MANDATORY Section for setting the defaults of the CORE functions

DEFAULT-CORE-FUNCT[ON]		='POWER ON'               	; MANDATORY
DEFAULT-CORE-FUNCT[OFF]		='POWER OFF'               	; MANDATORY
DEFAULT-CORE-FUNCT[POLL]	='POWER POLL'              	; MANDATORY
DEFAULT-CORE-FUNCT[VUP]		='VOLUME+'              		; MANDATORY
DEFAULT-CORE-FUNCT[VDN]		='VOLUME-'              		; MANDATORY
DEFAULT-CORE-FUNCT[REPEAT]	='REPEAT'					; OPTIONAL
;DEFAULT-CORE-FUNCT[PREFIX]	=''							; OPTIONAL
;DEFAULT-CORE-FUNCT[SUFFIX]	=''							; OPTIONAL

; MANDATORY Section for setting the defaults of the selections

DEFAULT-SELECTION[1]		='VIDEO'					; MANDATORY
DEFAULT-SELECTION[2]		='S-VIDEO'				 	; MANDATORY
DEFAULT-SELECTION[3]		='RGB1'					; MANDATORY
DEFAULT-SELECTION[4]		='RGB2'					; MANDATORY

; Documentation Section

;REQUIRES-FW-VERSION=$0,$d6